Drilled Rotor | Rotor Disc | Flettner Rotor | Rotor Replacement

One of the car parts that goes through extreme stress would be your brakes.  Several companies are searching for innovative ways to get better performance from your brakes.  Frozen Rotors® from Diversified Cryogenics now has a cost-saving solution for better brake systems.

The Frozen Rotors deliver increased performance and a higher level of safety while significantly reducing braking system costs.  The brakes undergo their proprietary, 60-hour cryogenic process that permanently and dramatically improves the usage life and stability of brake rotors.  It creates a distinct advantage in tensile strength, abrasive wear resistance and rotor longevity.

The Frozen Rotors® are robust enough that it can handle the stress and pressures of braking while resisting cracking, warping and fading on your brake system.  The cryogenic process inhibits the internal oxidation and increased thermal fatigue resistance thus allowing the Frozen Rotors® to last up to three times as long as untreated rotors.

The process also increases safety on your braking system.  The Frozen Rotors® provide more predictable and consistent braking performance even under extreme circumstances.  This is truly ideal for vehicles that require high-usage and high-performance braking systems at the same time, demand reliability and safety.

With all its features and excellent performance, the Frozen Rotors® effectively reduce your costs by extending the life of your braking system with the exceptional durability and confidence.  The Frozen Rotors® at the end sums up savings to thousands of dollars in brake rotor and pad replacement costs.

Drilled Rotors are now a common component in your vehicle.  Most of the brand new cars prefer drilled rotors over slotted rotors since they usually prove to be more economical and practical.  When replacing your rotor brakes, one of the things that you should consider when purchasing drilled rotor brakes would be the material.

The type of metallic element used to produce the rotor should be a critical factor in your selection process.  This would determine the strength of your rotor as well as wear and tear, noise and braking actions.  Since the materials are element, it should be able to withstand high temperature.  Remember that constant exposure to high temperatures plus the immense pressure during braking can cause your rotors to break easily.

Another factor would be its cooling capability.  During the process of manufacturing, the cooling rate of the iron is closely observed since this would determine the hardness and strength of the material.  An iron rotor that cooled down too quickly will be too hard and would be a noisy rotor compared to one that is cooled naturally.  Also hard iron rotors would wear pads faster but if the rotor is too soft then it will wear unevenly that can cause braking malfunctions.

With these details, it is highly recommended that you choose a metal alloy like chrome moly steel.  Most of these rotors, may be a little bit more expensive than iron-casted but they definitely last longer and provides better braking action.  So if you’re purchasing your next drilled rotors soon, consider these factors when making your decision.

If you want to purchase drilled rotor brakes but is out of budget, you can actually try to make one by yourself as a do-it-yourself project.  Of course, you will require your old-fashioned rotor brakes.  Once you have your master pattern ready, re-produce this you can use as working templates.  Next, with the aid of a compass and some draughting tools, make the pattern of holes that would be drilled on the rotor.  You need to remember that the holes must be properly spaced and with even gaps in between.  Note that if you put the holes so closely together, it can actually cause breakage of your rotor brakes.  Just imagine your brake pads pressing against your drilled rotors and the amount of pressure applied must be seriously considered.  If the holes are drilled near each other, then the tensile strength of the material in between each holes becomes lesser making your drilled rotors weaker and breaks easily.

The next step to this project is the actual drilling of the holes onto your rotor brakes.  Before proceeding, you must tape the pattern onto the rotor.  It is also recommended to centre punch each hole so that the preliminary hole will guide the drill bit properly.  Actual drilling must be done with a drill press.  Remember that your rotor brake is made of cast iron or other heavy material which will be too strong for your regular handheld drill.  If you do not have a drill press, then you must take your rotors with the templates to a machine shop for drilling and chamfering.  Once the holes are drilled, then you have your very own self-made drilled rotors.

Cryo Rotors is a revolutionary brake system now available on special order.  Originally intended for trucks and heavy equipment, the cryo rotors can also be customized to fit in your SUVs and other vehicles that warp their brake pads easily.  Cryo rotors are manufactured by Power Slot, a division of Centric Parts, one of the leading suppliers of replacement brake parts and hydraulics.

The rotors goes through a Power Slot’s proprietary 60-hour cryogenic process which gives the rotors tensile strength and resistance to harsh conditions that causes damage thus giving your rotors a longer service life.  This procedure involves treating the rotors at 300 degrees below zero which permanently alters the atomic structure of the elements used to manufacture the rotor.  The cryogenic process extends your brake life to twice or even thrice than normal brake rotors by redistributing residual stress on the rotor that provides an extra level of protection against damage.

The slots on the cryo rotors are designed to use the rotor’s direction in increasing functionality.  Therefore cryo rotors for the left wheel should only be used for the left side and same goes for the rotor for the right side.

Cryo Rotors are highly recommended for use in heavy equipment and vehicles like trucks.  It is also ideal for use in your race cars or your sports car that requires heavy braking at high speed.  At the moment, cryo rotors are made to order and needs at least 2 weeks for the cryogenic treatment.

The brake system of your car must be able to handle your car’s maximum speed capacity.  Several vehicles that are commercially available in the market like cars and motorcycles normally use drilled brake rotors.  The holes on the rotors help get rid of water, dust and other substances that might get on the surface decreasing stopping power.  It also helps lower the heat caused by friction produced by the brake pad pressed against the brake rotor. 

There are also sport drilled rotors available that can be purchased to replace the normal drilled brake rotors.  So what makes the sport drilled rotors different?  Sports cars like the fitted with the sport drilled rotors.  This type of brake rotors are made out of high-carbon cast-iron vented material that increasing the braking performance to halt even the fastest car.  The material, high-carbon can withstand high temperature produced by friction without warping your brake pads thus prolonging its life.  This high-carbon material is strong and durable giving a lasting performance for your brake rotor compared to drilled brake rotors made of iron.  It is engineered to maximize strength and each hole is strategically placed distributing braking strength evenly for a smooth stop.  The holes also relieve stress on the whole rotor decreasing breakage and cracks. 

Sport drilled rotor brakes are manufactured as a direct fit replacement so that it can immediately replace your normal drilled rotor with no need for any conversion.  If you are thinking of transforming your car into a speedster, one important component to change as well is the brake rotor.  Then the sport drilled rotor is the brake for you.